How to set the CD-R tray

How to set the CD-R tray

How to set the CD-R tray
1. Confirm that the printer is powered on.
2. Open the paper output tray and inner cover (CD-R tray feeder).
Memo: 
Gently open the paper output tray while holding it. 
3. Place the CD-R/DVD-R on the CD-R tray.
Memo: 
Prepare a 12 cm/8 cm size CD-R/DVD-R with an ink-jet compatible label surface.

<Procedures for setting a 12 cm CD-R/DVD-R>
Place the disk on the CD-R tray, with the printable surface facing up.
<1> CD-R tray
<2> 12 cm size CD-R/DVD-R
<3> Reflectors
Note: 
Do not touch the reflectors on the CD-R tray.
<Procedures for setting an 8 cm CD-R>
Align the protrusions on both edges of the 8 cm CD-R adapter with the indentations on the CD-R tray, and place the 8 cm CD-R on the CD-R tray.
Note: 
When printing on an 8 cm CD-R, use the 8 cm CD-R adapter (provided). 
Otherwise, print quality will be reduced and the CD-R may be damaged.
<1> CD-R tray
<3> Reflectors
<4> Protrusions on the 8 cm CD-R adapter
<5> Indentations used when setting the 8 cm CD-R adapter
<6> 8 cm CD-R
Note: 
Do not touch the reflectors on the CD-R tray.
4. Install the CD-R tray in the inner cover.
Memo: 
When printing on a CD-R/DVD-R using an application, do not set the CD-R tray until the “Starting printable disc printing” message is displayed. 
If the CD-R tray is set while the printer is preparing to print or performing other operations, the CD-R tray may be ejected. In this case, re-set the CD-R tray, following the instruction displayed. 
5. Insert the CD-R tray so that the arrows of both the CD-R tray and inner cover are aligned. 
(Check the arrow position of the CD-R tray and inner cover.)

Leave a reply

Your email address will not be published.